PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :
특 징
AT45 (고전압) 옵션
45V Rise, 50 Ohm, 10nS / Div
45V Rise Hi Z, 10nS / Div
사 양
I/O Configuration
Model/Output | 577 – 4C: 4 Independent Channels 577 – 8C: 8 Independent Channels |
Output Modules
Standard AT20 | Dual Channel, TTL/CMOS & Adjustable Output Module |
Optional L82 | Dual Channel, 820 nm Optical Output Module |
L130 | Dual Channel, 1300 nm Optical Output Module |
AT35 | Dual Channel, TTL/35 V High Voltage Output Module |
AT45 | Dual Channel, 45 V High and Low Impedance Voltage Output Module (limited to 4 channels) |
TZ50 | Dual Channel, High Current TTL/CMOS (for driving 50 ohm loads) & Adjustable Output Module |
TZ35 | Dual Channel, High Current TTL/CMOS (for driving 50 ohm loads) & 35 V High Voltage Output Module |
Input Modules
Standard IA15 | Dual Channel, 1 Trigger / 1 Gate Input Module * Standard dual channel input module, providing one Trigger input and one Gate input. May be used with the Dual Trigger firmware Option to provide two independent Trigger sources. |
Optional IL82 | Dual Channel, 820 nm Optical Input Module |
IL130 | Dual Channel, 1300 nm Optical Input Module |
Internal Rate Generator
Rate (T0 period) | 0.001 Hz to 20.000 MHz (1000 s – 50 ns) |
Resolution | 5 ns |
Accuracy | 5 ns + (0.0001 x period) |
T0 Period Jitter | |
Time Base | 200 MHz, low jitter PLL |
Oscillator | 50 MHz, 50 ppm crystal oscillator |
System Output Modes | Single, Normal, Burst, Duty Cycle, External Gate/Trigger |
Burst Mode | 1 to 10,000,000 pulses |
Duty Cycle Mode | 1 to 10,000,000 pulses ON and/or OFF |
Pulse Control Modes | Internally triggered, externally triggered or external gate. |
Channel Timing Generator
Pulse Witdh Range | 10 ns -1000 s |
Witdh Accuracy | 1 ns + [0.0001 x (witdh + delay)] |
Witdh Resolution | 250 ps |
Pulse Delay Range | 0 - 1000s |
Delay Accuracy | 1 ns + (0.0001 x delay) |
Delay Resolution | 250 ps |
Jitter (channel to channel) | < 250ps RMS |
Output Multiplexor | Any/all channels may be OR’d to any/all outputs. |
Time Base | Same as internal rate generator |
Channel Output Modes | Single, Normal, Burst, Duty Cycle |
Burst Mode | 1 to 10,000,000 pulses |
Duty Cycle Mode | 1 to 10,000,000 pulses ON and/or OFF |
Wait Counts | 1 to 10,000,000 pulses |
Channel Control Modes | Internally triggered or external gated. Each channel may be independently set to either mode. |
Standard Features
Communications: | |
---|---|
USB | USB 1.0 Standard |
RS-232 | DB-9 Connector using RS-232 Communications Standard |
External Clock In | 10 MHz – 100 MHz user selectable in discrete values |
External Clock Out | To or Ref out (10 to 100 MHz) user selectable in discrete values |
System Options
td15 | Dual Trigger Logic – provides atditional trigger via gate input |
COM | Extended Communications – Atds Ethernet & GPIB |
SRM | Single Rack Mount |
DRM | Dual Rack Mount |
General
Storage | 16 storage bins |
Dimensions | 10.5” x 8.25” x 5.5” |
Weight | 8 lbs |
Power | 100 - 240 VAC 50/60 Hz |
Fuse | (Qty 2) 3.15 A, 250 V Time-lag |
Temperature | |
---|---|
Operation | 0 - 40°C (32 - 104°F) |
Transportation & Storage | -40 - 70°C (-40 - 158°F) |
Module Specifications
TTL/Adjustable Dual Channel Output Module | (Standard) |
Output Impedance | 50 ohm |
TTL/CMOS Mode: | |
Output Level | 4.0 V typ into 1 kohm |
Rise Time | 2.8 ns typ (10% - 90%) |
Slew Rate | > 0.5 V/ns |
Jitter | 50 ps RMS channel to channel |
Adjustable Mode | |
Output Level | 2 V to 20 VDC into 1 kohm |
1 V to 10 VDC into 50 ohm | |
Output Resolution | 10 mV |
Current | 200 mA typical, 400 mA (short pulses) |
Rise Time | 15 ns typ @ 20V (high imp) |
25 ns typ @ 10V (50 ohms) | |
(10% - 90%) | |
Slew Rate | >0.1V/ns |
Overshoot |
Trigger/Gate Dual Input Module | (Standard) |
Trigger Input: | |
Function | Generate individual pulses, start a burst or continuous stream |
Rate | DC to 1/ (200 ns + longest active pulse). Maximum of 5 MHz |
Slope | Rising or Falling |
Threshold | 200 mV to 15 VDC |
Maximum Input | 60 V Peak |
Resolution | 10 mV |
Trigger Accuracy | ±3% of Threshold Voltage |
Impedance | 5.3 kohm + 40pF |
Rate | DC to 20 MHz |
Trigger Jitter | |
Insertion Delay | |
Minimum Pulse Witdh | ? 20 ns |
Pulse Inhibit Delay | |
Output Inhibit Delay | |
Gate Input: | |
Mode | Pulse inhibit or output inhibit |
Polarity | Active high/active low |
Optical Outputs
Wavelength | 820 nm or 1300 nm |
Maximum Signal Rate | 5 MBd |
Maximum Link Dist. | 1.5 km |
Connector Type | ST |
Optical Inputs
Wavelength | 820nm or 1300nm |
Maximum Signal Rate | 5 MBd |
Maximum Link Dist. | 1.5 km |
Connector Type | ST |
Insertion Delay | |
Jitter |
AT35 Specifications
Through a 50? load at 200 Hz | |
Output | 5 V – 35 V |
Setpoint Resolution | 10 mV |
Rise Time | |
Accuracy | 500 mV |
Max. Frequency (Internal & External) | 4 kHz |
TZ50 Specifications
TTL/CMOS Mode | |
Output Level | 4.0 V typ into 50 Ohms |
Rise Time | 2.8 ns |
Slew Rate | 0.5 V/ns |
Jitter - Channel to Channel | 50 ps RMS |
Adjustable Mode | |
Output Resolution | 10 mV |
Current | 100 mA typ, 400 mA max (short pulses) |
Slew Rate | 0.1 V/ns |
AT45 Specifications
Amplitude | 4 V – 45 V |
Resolution | 20 mV |
Accuracy | +/-1.5% |
Rise Time | |
Fall Time | |
Frequency (Internal & External) | DC – 100 kHz |
Overshoot | |
Polarity - High Z (>10k) | Active High or Active Low |
Polarity - Low Z (50 Ohms) | Active High Only |
Pulse Witdh - High Z (>10k) | 10 ns to DC |
Pulse Witdh - Low Z (50 Ohms) | 10 ns to 10 s |
Current (maximum) | 35 mA (High Z @10 ms witdh) 900 mA (Low Z @ 10 ms witdh) |
표준부속품
Part Number | Description |
---|---|
P/N6923 | Model 577 19" Rack Mount |
P/N6978 | Model 577 19" Dual Rack Mount |
글읽기 권한이 없습니다.
"19세 미만의 미성년자"는 출입을 금합니다!
번호 | 카테고리 | 제목 | 작성자 | 작성일 | 조회 |
---|---|---|---|---|---|
4 | 견적 | BNC-577 | 오**** | 23.03.23 13:54:31 | 1 |
3 | 견적 | BNC-577 | 테스트링크 | 23.03.23 14:06:29 | 3 |
2 | 견적 | BNC model 577 견적 문의드립니다. | 김**** | 21.04.30 16:55:55 | 2 |
1 | 견적 | BNC model 577 견적 문의드립니다. | 테스트링크 | 21.04.30 17:11:03 | 1 |