internally triggered, externally triggered and external gate
output multiplexer
any/ all channels may be multiplexed to any/ all outputs
delayed output
0 to 9,999,999 pulses
timebase
same as internal rate generator
DELAYS
range
0 - 1000 s
accuracy
1.5 ns + 0.0001 delay
resolution
250 ps
RMS jitter
<400 ps
pulse inhibit delay/ output inhibit delay
120 ns / 50 ns
INTERNAL RATE GENERATOR
timebase
100 MHz, low jitter PLL
rate
0.0002 Hz to 10.000 MHz
resolution
10 ns
accuracy
same as timebase
RMS jitter
50 ps
burst mode
1 to 9,999,999 pulses
oscillator
50 MHz, 25 ppm
TTL/ Adjustable Channel Output Impedance
50 ohm
TTL/CMOS MODE
output level
4.0 V typ into kohm
rise time
3 ns typical
slew rate
> 0.5 V/ ns
jitter
50 ps RMS
ADJUSTABLE MODE
output level
2.0 to 20 VDC into 1 kohm, 1.0 to 10 VDC into 50 ohms
output resolution
10mV
current
200 mA typical, 400 mA max (short pulses)
slew rate
>0.1 V/ns
overshoot
< 100 mV + 10% of pulses amplitude
TRIGGER/GATE DUAL INPUT MODULE (standard)
threshold
0.2 to 15 VDC
maximum input voltage
60 V peak
resolution
10 mV
input impedance
1 Mohm + 40 pF or 50 ohm
trigger insertion delay
<180 ns
trigger jitter
<800 ps RMS
external clock in/out
10 MHz - 100 MHz
옵 션
588-OEM-1n Series Options :
I-Pulse Increment Option
The (I) increment modes for the 588-OEM Pulse Generators are a pair of special modes which allows the delay and width of each channel to be incremented at the end of a burst of pulses.
Standard Communication Options
Serial, USB or GPIB interface
588-OEM-250p Series Options :
TZ50 - 50 Ohm Output Module
The TZ50 option allows a user to have a 50 ohm load on the output while maintaining an output amplitude of at least 4 Volts while in the TTL/CMOS mode.
DT15 - Dual Trigger Input
The DT15 module option allows the Gate input to double as a second trigger input.
I-Pulse Increment Option
The (I) increment modes for the 588-OEM Pulse Generators are a pair of special modes which allows the delay and width of each channel to be incremented at the end of a burst of pulses.
한국어
